- Flat glass
- Processing glass
-
- Reflective glass
- Low-e glass
Tempered glass
-
Flat tempered safety glass
Laminated glass
- Insulated glass
- Frosted glass
- Anti-glare glass
- Beveled glass
- Glass door
- Solar cell & panels
- Fire-retardant Glass
- Mirror glass
- Decorative glass
- Glass and mirror accessories
- Show room
- Featured Products
Flat tempered glass
What is it ?
Noval tempered glass is a toughened safety glass. It has undergone a special heat treatment to increase its strength and resistance to impact. In fact it is approximately five times more resistant than normal glass. As an example a piece of 8mm toughened glass will be able to withstand a steel ball weighing 500gr dropped from a height of 2 metres.
Advantages
·Five times more resistant to breakage than normal
glass.
·If the glass does break, there is far less risk ofinjury from broken pieces.
·More opportunity for large areas of glazingwithout substituting your safety, includingframless designs such as doors, showers,screens table tops and so on.
glass. ·If the glass does break, there is far less risk of
injury from broken pieces. ·More opportunity for large areas of glazing
without substituting your safety, includingframless designs such as doors, showers,screens table tops and so on.
Application
Ideal for use in interiors, Noval acid etched glass can be sited in a wide variety of applications:
·All doors (sliding-glass, French, and patio).
·Side windows within 24 in. of an opening ordoor.
·Stair landing windows within 4 ft. of the floor.
·Bathroom windows, within 5 ft. of the floor.
·All windows within 18 in. of the floor.
·All tub and shower enclosures.
·All doors (sliding-glass, French, and patio).
·Side windows within 24 in. of an opening or
door.·Stair landing windows within 4 ft. of the floor.
·Bathroom windows, within 5 ft. of the floor.
·All windows within 18 in. of the floor.
·All tub and shower enclosures.
Installation Guidelines
·Toughened glass cannot be drilled or any other processed and edgeworked in any manner.
·Toughened glass ordered to templates must be accompanied with a full scale template made to thecorrect dimensions.
·Minimum edgework finish on toughened glass up to 12mm is a standard arrissed edge. Minimumedgework on greater thicknesses should be a flat ground edge;
·Slight distortion or bowing may occur after toughening but is largely controllable. It will vary withsubstance, tint, surface treatment, size and shape of the glass. Ceramic painted, sandblasted orreflective coated glass has a greater tendency to bow and special tolerances would be advised.Flatness will be measured when the glass is standing on edge with a straight edge placed along thefull length of the panel and a wedge measurement taken at the centre position. Refer to our technicaldepartment for more information.
·Toughened glass ordered to templates must be accompanied with a full scale template made to the
correct dimensions. ·Minimum edgework finish on toughened glass up to 12mm is a standard arrissed edge. Minimum
edgework on greater thicknesses should be a flat ground edge; ·Slight distortion or bowing may occur after toughening but is largely controllable. It will vary with
substance, tint, surface treatment, size and shape of the glass. Ceramic painted, sandblasted orreflective coated glass has a greater tendency to bow and special tolerances would be advised.Flatness will be measured when the glass is standing on edge with a straight edge placed along thefull length of the panel and a wedge measurement taken at the centre position. Refer to our technicaldepartment for more information.
Production Range
·Maximum size: 3660*120000mm
·Minimum size: 200*200mm
·Thickness: 2.8~25mm
·Minimum size: 200*200mm
·Thickness: 2.8~25mm
Production introduction
For detailed, technical product information on this glass, click on the corresponding product file (s)
Flat Tempered Glass Introduction PDF
Flat- Tempered-Glass-CE-Standard PDF
Flat Tempered Glass Introduction PDF Flat- Tempered-Glass-CE-Standard PDF
Your Resource Center
Discover how the glass
productioncan be processed
according to CE standard
Glossary (PDF)
Glass process
+ more
productioncan be processed
according to CE standard
Glossary (PDF)Glass process+ more
We can help
Copyright © 2011 Novalglass.com all rights reserved
. | Powered by:B2B
Novalglass is a manufacturer of float glass,tempered glass,pattern glass,laminated glass in China.
Novalglass is a manufacturer of float glass,tempered glass,pattern glass,laminated glass in China.