INTRODUCTION
Noval Glass Temperable Mirror Glass is produced by advanced vacuum magnetron sputtering process, coating multi-layer films on high-quality low iron float glass, which has relatively ideal visible light reflectivity.
Noval Glass Temperable Mirror Glass has rich colors, gorgeous appearance, and convenient processability to provide excellent safety effects for modern buildings and home environments. This glass realizes subsequent processing such as tempering after coating.
In order to ensure the best installation and use, and extend the service life of the product, please read this instruction carefully before use, and operate according to the method required by this instruction.
UNPACKING
This product is sealed with plastic film, shading and moisture-proof. Normally glass is taken out of box from the glass side. So, in order to facilitate the cutting process, the coated side is facing the inside of the box when packing. Please identify the opening side before unpacking. The box card arrow mark points to the film surface.
INSPECTION
The glass should be conducted a thorough inspection before processing. If any quality problem, the processing shall be stopped immediately and put forward to us timely. The defective product shall be properly preserved, and the processing shall be continued after our after-sales personnel arrive at the site for confirmation.
PRICESSING, CLEANING & STACKING
After the glass is cut, the glass should be leaned on the A-frame (or L-frame) at 6 ~ 7 °, and the number of stacking should not exceed 30 pieces. In the process tempering and after tempering, the film of first piece of glass should face outward, and the rest should face inward.
After unpacking, the glass shall be cut, edged, cleaned, tempered and processed as soon as possible. During the operation of each process, operators must wear dry and clean leather gloves and masks to avoid saliva or sweat polluting the film.
The standard Low-E soft brush shall be used for edge grinding cleaning machine or insolation cleaning machine to clean the film layer. The water quality shall be pure water for cleaning. The height of the cleaning machine shall be adjusted properly to prevent the film layer from being scratched. The height of the cleaning machine is generally 0.5-1mm higner than the glass thickness.
HEAT TREATMENT
Heat treatment refers to tempering, heat strengthen, and bending tempering.
Please check the appearance quality of the film surface according to the corresponding standards when the product is tempered and after tempering, and check whether there is any abnormal condition such as peeling off and slag dropping. Before tempering, keep the film surface clean. If it is a product quality problem, please inform us in time and seal the package, so that we can deal with the quality problem timely and accurately.
The change of heat treatment processing technology (including the change of equipment) will affect the optical performance and color of glass, which should be adjusted according to the user's own equipment. The tempering parameters in this instruction are for reference only.
If you can adopt the above instructions and suggestions in the process of use, I believe it is very pleasant and meaningful for you and us. If you have any other problems, you need us to improve service and help, please feel free to contact us.
TEMPERABLE MIRROR is one of the main products of Noval Glass with good Wholesale Price and quality, Factory direct sales are the cheape. Our company is a professional supplier(s) china and manufacturers, with various products For sale.