A FLAT TEMPERED GLASS cold quenching process, when the flat glass heated to the tempering temperature is about to be released from the furnace, the upper and lower cooling and quenching grids start to blow continuously to form a wind field; It is sent out into the wind field formed by the upper and lower cooling and quenching grids.

The manufacturer of FLAT TEMPERED GLASS tells you that the swing of the glass continuously swinging back and forth along the traveling direction is random and not less than the minimum set value. and not less than the minimum set value. The manufacturer of FLAT TEMPERED GLASS tells you that the swing amplitudes of the two kinds of swings are set randomly, and the swinging point positions of the glass relative to the upper and lower cooling air grids in both directions are also random. The location is also random.
The manufacturer of FLAT TEMPERED GLASS tells you that the wind spots formed by each round-trip swing of the glass are also scattered at different round-trip points, and there is no repeated accumulation and continuous strengthening effect, and the tempered glass produced is basically free of wind spots.