The manufacturer of EPOXY MIRROR tells you that a mirror is an item with a smooth surface and the ability to reflect light. Mainly used as clothing mirrors, furniture accessories, architectural decorations, optical instrument components, solar cookers, reflectors for car lights and searchlights, reflecting telescopes, car rearview mirrors, etc. Here's how to make it.

The manufacturer of EPOXY MIRROR tells you that there are two methods for surface processing of glass to form a reflective imaging surface: chemical silver plating and vacuum evaporation. The most commonly used method is chemical silver plating. This method is to dissolve silver nitrate in water, add ammonia water and sodium hydroxide solution and dilute it into silver hydroxide ammonia double salt to make a silver plating solution. Invert sugar or formaldehyde, sodium potassium tartrate solution is used as reducing solution. The manufacturer of EPOXY MIRROR tells you that after the glass is cut, edged (if necessary, ground and polished), and the surface is cleaned, it is sensitized with a dilute stannous chloride solution, then washed, and then mixed with silver plating solution and reducing solution immediately. The surface is dipped, cleaned after mirror formation, and subsequently copper plated and protective lacquered. The vacuum evaporation method is to clean the glass, place it in an evaporation device with a vacuum degree of 0.1-10Pa, and energize the spiral tungsten wire. The high temperature generated will evaporate the aluminum alloy in the spiral into a gaseous state, and deposit it on the surface of the glass to form a mirror surface. An electron gun can also be used instead of tungsten wire for heating. The vacuum evaporation method can also process the smooth metal surface into a mirror surface.
The above is the EPOXY MIRROR manufacturer taking you to understand the mirror making method, I hope it will be helpful to you.