SGP LAMINATED GLASS is made of two or more pieces of glass with one or more layers of organic polymer interlayer film between them. After a special high-temperature pre-pressing (or vacuum) and high-temperature and high-pressure process, the glass and the interlayer Permanently bonded composite glass products.

Even if the glass is broken, the shards will be stuck on the film, and the surface of the broken glass remains clean and smooth. This effectively prevents the occurrence of debris piercing and penetrating fall incidents, and ensures personal safety. In Europe and America, most architectural glass uses SGP LAMINATED GLASS, not only to avoid injury accidents, but also because SGP LAMINATED GLASS has excellent seismic intrusion resistance. The interlayer membrane can withstand continuous attacks from weapons such as hammers and choppers, and can also resist penetration by bullets for a long time. The degree of security is extremely high. The manufacturer of SGP LAMINATED GLASS tells you that the glass ruptures safely. It may break under the impact of a heavy ball, but the whole glass still maintains an integrated interlayer, and fragments and sharp small fragments are still glued to the intermediate film. When this kind of glass is broken, the fragments will not be scattered, and it is mostly used in vehicles and other vehicles.
The manufacturer of SGP LAMINATED GLASS tells you that toughened glass requires a large impact to break. Once broken, the whole glass bursts into countless fine particles, leaving only a few broken glass in the frame. Ordinary glass shatters as soon as it hits. The typical shattering situation produces many long, sharp-edged fragments. When SGP LAMINATED GLASS is broken, the mirror tooth-shaped fragments surround the hole, and there are more glass fragments around the penetration point, and the length of the wire breakage varies.